Stucco Calculator – 3-Coat System 22 mm

Instead of working from a supplier's ballpark figure, this calculator derives your stucco requirement from Stucco Volume = Area × 0.022 m (scratch 9.5 + brown 9.5 + finish 3 mm) using the exact wall area and coat schedule you provide. The arithmetic stays transparent: each result links back to the displayed formula, so you can audit any number. For instance: A 60 m² facade takes 1.32 m³ of stucco - roughly 16 bags of cement and 1.5 m³ of sand. Keep in mind: Cure each coat slowly - 48 h misting prevents map cracking. Quantities are rounded conservatively so offcuts, spillage and delivery shortages never stop work mid-job.

1. 1

   Measure the space

   Record the wall area and coat schedule at the widest and longest points.

2. 2

   Enter the values

   Type the measurements into the calculator and select your units.

3. 3

   Apply the formula

   The tool computes Stucco Volume = Area × 0.022 m (scratch 9.5 + brown 9.5 + finish 3 mm) for your inputs instantly.

4. 4

   Add waste and order

   Review the total with a 5-10% margin and round up to whole units.

• Wrong unit count per area

• Mortar joints of uneven width

• Dry absorbing units